MICA HEATERS

Mikanitovi heaters are defined as such heaters made of Mica, external insulation, usually stainless steel, and the insulator, the most commonly used ceramics for insulation in the construction of mikanitovi heaters. Mikanitovite heaters are often used for production purposes, but in parallel, even, perhaps, more often overlapping services (http://www.nagrevatel.eu).

By their very nature Mica material allows the production of mikanitovi heaters are very thin on his own and allow installation and adaptation to specific elements and products. Mikanitovite heaters, most often a flat (plane). Flat mikanitovi heaters can be manufactured with a minimum thickness of about mikanitov heater mm and can reach a greater thickness. Standard mikanitovi heaters vary with thickness of about two to five millimeters. This thickness in mikanitov heater is mainly determined by the power to be inserted therein and reasonably isolation that requires this type heaters. (http://www.nagrevatel.eu). Flat mikanitovi heaters can be manufactured in various sizes and shapes – each mikanitov heater can be square – square mikanitov heater, heater mikanitov rectangular, trapezoidal mikanitovi heaters, even round, sometimes mikanitovite heaters are made with other unpopular geometric shapes.

Another type of mikanitovite heaters that are popular are drum heaters. These are mikanitovi heaters, non-flat surface and are bent in the form of a drum. This mikanitov drum heater can be of different diameter and length. Drum heaters mikanitovi (http://www.nagrevatel.eu), most often with a width (in drum heaters that could be considered as height), varying between three and twenty to thirty centimeters. This in no way limited to a specific size mikanitovi drum heaters, from which individual customer needs.

Mikanitovite heaters can be drilled so that they have specific characteristics that promote their attachment to a surface, which is scheduled to present mikanitov heater heats. So often mikanitovite heaters may be of circles, rectangles or other specific cut mikanitoviya heater forms through which it can be adapted to a surface. This is mostly because the specific surface is heated over a bump myself, screw, bolt, nut or the like. In these situations Sawing mikanitovite heaters they fit perfectly on the surface, which are made while retaining its original form.

Mikanitovite heaters may be grabbing the most varied and option parts. Most mikanitovi heaters are fitted by a silicone cable. Customers prefer silicone cable because of its thermal stability and choice of length, they need its power. Mikanitovi heaters silicone cable over a meter long, and even more are not unusual. Silicone cable can be gripped in both terminal and directly to the power to certain devices and thermal protection, and also in the breakers. On silicon cable coming out as a power mikanitov heater can be installed to hold additional items. These are called lugs, cable and other ears. Mikanitovite heaters can also end with twisted ends of the wire, hard edges, and for specific requirements mikanitoviya heater can be completed with the popular brass terminals, although this is not typical for mikanitovi heaters since it prevents their installation and dismantling more than it facilitates (http://www.nagrevatel.eu).

Mikanitovite heaters are used more often in the service as desired at the nominal temperature is not very high and their shape allows mikanitoviya heater quickly and easily attached to any particular plane or cylinder while almost every mikanitov heater not affect the initial shape of the panel on which is mounted mikanitov nagrevatel.Tuk given most often becomes a matter of preventing freezing of certain key elements in a process through mikanitov heater rather than heating a surface in order to reach certain temperature and maintained, although those cases are rejected.

More information you can find on the website of our company – http://www.nagrevatel.eu, or listed on ways to contact us.